Subversion

From KevinWiki

(Difference between revisions)
Jump to: navigation, search
Line 130: Line 130:
==Access via WebDAV protocol with SSL encryption (<code>https://</code>)==
==Access via WebDAV protocol with SSL encryption (<code>https://</code>)==
*Enable SSL in your Apache server.
*Enable SSL in your Apache server.
 +
 +
=== With Basic (htpasswd) Authentication ===
*Create <code>/etc/apache2/sites-available/svn</code> file and add the following lines.
*Create <code>/etc/apache2/sites-available/svn</code> file and add the following lines.
  <VirtualHost *:443>                                       
  <VirtualHost *:443>                                       
Line 157: Line 159:
 +
*Enable site and restart apache2
 +
$ sudo a2ensite svn
 +
$ sudo /etc/init.d/apache2 restart
 +
 +
 +
=== With Digest (htdigest) Authentication ===
*To use htdigest as an authentication method instead of htpasswd, modify the <code>/etc/apache2/sites-available/svn</code> file like:
*To use htdigest as an authentication method instead of htpasswd, modify the <code>/etc/apache2/sites-available/svn</code> file like:
  <VirtualHost *:443>                                       
  <VirtualHost *:443>                                       
Line 191: Line 199:
$ htdigest passwordfile realm another_username  
$ htdigest passwordfile realm another_username  
</pre>
</pre>
-
 
*Enable site and restart apache2
*Enable site and restart apache2
Line 197: Line 204:
  $ sudo /etc/init.d/apache2 restart  
  $ sudo /etc/init.d/apache2 restart  
-
 
+
* If it shows an error message like this
-
* If there it shows an error message like this
+
<pre>
<pre>
Invalid command 'AuthUserFile', perhaps misspelled or defined by a module not included in the server configuration
Invalid command 'AuthUserFile', perhaps misspelled or defined by a module not included in the server configuration
Line 212: Line 218:
-
-If you have another virtual host using 443 port, make sure you default (or mysite) site file has the following line.
+
=== More than one Virtual Host ===
 +
* If you have another virtual host using 443 port, make sure you default (or mysite) site file has the following line.
  NameVirtualHost *:443
  NameVirtualHost *:443
 +
=== Access through SSL ===
-Now the SVN is accessible through this URL
-Now the SVN is accessible through this URL
<pre>
<pre>
https://svn.yoursite.com/test
https://svn.yoursite.com/test
</pre>
</pre>

Revision as of 07:04, 11 April 2009

Contents

Subversion (SVN)

Installation

-Install Subversion from the repository

$ sudo apt-get install subversion 

-Add group subversion

$ sudo addgroup subversion 
Adding group `subversion' (GID ****) ...
Done.

-Add yourself and www-data (the Apache user) as users to this group

$ sudo adduser username subversion 
Adding user `username' to group `subversion' ...
Adding user username to group subversion
Done.

$ sudo adduser www-data subversion 
Adding user `www-data' to group `subversion' ...
Adding user www-data to group subversion
Done.

Create SVN Home

-Create SVN home

$ sudo mkdir /opt/svn 
$ cd /opt/svn 
$ sudo mkdir myproject 
$ sudo chown -R www-data myproject 
$ sudo chgrp -R subversion myproject 
$ sudo chmod -R g+rws myproject 

-Create repository

$ sudo svnadmin create /opt/svn/myproject 

or

$ sudo svnadmin create --fs-type fsfs /opt/svn/myproject 

-to use WebDAV, repeat the chmod -R g+rws myproject command again as because svnadmin will create directories and files without group write access.


Access via WebDAV protocol (http://)

-Install libapache2-svn

$ sudo apt-get install libapache2-svn 
...
Enabling module dav.
Enabling module dav_svn.
Run '/etc/init.d/apache2 restart' to activate new configuration!

-Edit /etc/apache2/mods-enabled/dav_svn.conf file

<Location /svn/myproject>
    DAV svn
    SVNPath /opt/svn/myproject
#    SVNParentPath /opt/svn/
    AuthType Basic
    AuthName "lckymn.com subversion repository"
    AuthUserFile /etc/subversion/.passwd
    <LimitExcept GET PROPFIND OPTIONS REPORT>
        Require valid-user
    </LimitExcept>
</Location>

This <LimitExcept GET PROPFIND OPTIONS REPORT></LimitExcept> block gives read-only access to anyone, yet write permission to only authenticated users in the file /etc/subversion/.passwd.


-To set up with multiple virtual hosts create /etc/apache2/sites-available/svn file instead of editing /etc/apache2/mods-enabled/dav_svn.conf file.

<Location /svn/myproject>
    DAV svn
    SVNPath /opt/svn/myproject
#    SVNParentPath /opt/svn/
    AuthType Basic
    AuthName "lckymn.com subversion repository"
    AuthUserFile /etc/subversion/.passwd
    <LimitExcept GET PROPFIND OPTIONS REPORT>
        Require valid-user
    </LimitExcept>
	SSLRequireSSL
</Location>
$ cd /etc/apache2/sites-available
$ sudo a2ensite svn

-SSLRequireSSL is added to use SSL when accessing svn.


-To limit any connection to the SVN-Server (private SVN) so only authenticated user can have read and write permissions, remove the lines <LimitExcept GET PROPFIND OPTIONS REPORT> and </LimitExcept>.

<Location /svn/myproject>
    DAV svn
    SVNPath /opt/svn/myproject
#    SVNParentPath /opt/svn/
    AuthType Basic
    AuthName "lckymn.com subversion repository"
    AuthUserFile /etc/subversion/.passwd
#    <LimitExcept GET PROPFIND OPTIONS REPORT>
        Require valid-user
#    </LimitExcept>
</Location>


-use SVNParentPath if there are multiple repositories under a single directory (e.g. /opt/svn/project1, /opt/svn/projec2, /opt/svn/project3)

<Location /svn>
    DAV svn
#    SVNPath /opt/svn/myproject
    SVNParentPath /opt/svn/
    AuthType Basic
    AuthName "lckymn.com subversion repository"
    AuthUserFile /etc/subversion/.passwd
#    <LimitExcept GET PROPFIND OPTIONS REPORT>
        Require valid-user
#    </LimitExcept>
</Location>


-Create user and password

$ sudo htpasswd -c /etc/subversion/.passwd user_name 


-Restart Apache server

$ sudo /etc/init.d/apache2 restart 


Access via WebDAV protocol with SSL encryption (https://)

  • Enable SSL in your Apache server.

With Basic (htpasswd) Authentication

  • Create /etc/apache2/sites-available/svn file and add the following lines.
<VirtualHost *:443>                                       
    ServerAdmin webmaster@yoursite.com          

    SSLEngine on

    SSLOptions +StrictRequire

    SSLCertificateFile /etc/ssl/certs/server.crt
    SSLCertificateKeyFile /etc/ssl/private/server.key

    ServerName svn.yoursite.com

    <Location /myproject>
        DAV svn
        SVNPath /opt/svn/myproject
#        SVNParentPath /opt/svn/
        AuthType Basic
        AuthName "svn.yoursite.com subversion repository"
        AuthUserFile /etc/subversion/.filename.htpasswd
#        <LimitExcept GET PROPFIND OPTIONS REPORT>
            Require valid-user
#        </LimitExcept>
    </Location>
</VirtualHost>


  • Enable site and restart apache2
$ sudo a2ensite svn 
$ sudo /etc/init.d/apache2 restart 


With Digest (htdigest) Authentication

  • To use htdigest as an authentication method instead of htpasswd, modify the /etc/apache2/sites-available/svn file like:
<VirtualHost *:443>                                       
    ServerAdmin webmaster@yoursite.com

    SSLEngine on

    SSLOptions +StrictRequire

    SSLCertificateFile /etc/ssl/certs/server.crt
    SSLCertificateKeyFile /etc/ssl/private/server.key

    ServerName svn.yoursite.com

    <Location /myproject>
        DAV svn
        SVNPath /opt/svn/myproject
#        SVNParentPath /opt/svn/
        AuthType Digest
        AuthName realm
        AuthUserFile /etc/subversion/.filename.htdigest
#        <LimitExcept GET PROPFIND OPTIONS REPORT>
            Require valid-user
#        </LimitExcept>
    </Location>
</VirtualHost>
  • To create htdigest file, use the command below and type the password for the user.
$ htdigest -c passwordfile realm username 
  • To add more users to the existing realm
$ htdigest passwordfile realm another_username 
  • Enable site and restart apache2
$ sudo a2ensite svn 
$ sudo /etc/init.d/apache2 restart 
  • If it shows an error message like this
Invalid command 'AuthUserFile', perhaps misspelled or defined by a module not included in the server configuration
   ...fail!
  • Enable auth_digest module.
$ a2enmod auth_digest 
  • Restart the server again.
$ sudo /etc/init.d/apache2 restart 


More than one Virtual Host

  • If you have another virtual host using 443 port, make sure you default (or mysite) site file has the following line.
NameVirtualHost *:443


Access through SSL

-Now the SVN is accessible through this URL

https://svn.yoursite.com/test
Personal tools