From KevinWiki

Revision as of 07:04, 25 August 2013 (view source) Kevin (Talk | contribs) (→Clone the Source) ← Older edit		Revision as of 07:27, 25 August 2013 (view source) Kevin (Talk | contribs) (→Configure GitLab DB settings) Newer edit →
Line 145:		Line 145:
	=== Configure GitLab DB settings ===		=== Configure GitLab DB settings ===
	* PostgreSQL		* PostgreSQL
		+	<pre>
	sudo -u git cp config/database.yml.postgresql config/database.yml		sudo -u git cp config/database.yml.postgresql config/database.yml
		+	</pre>
	<pre>		<pre>

---

Revision as of 07:27, 25 August 2013

Contents 1 Installation 1.1 Prerequisite 1.1.1 Install Postfix 1.1.2 Ruby 1.1.3 Add Git User 1.1.4 Install Gitlab-Shell 1.1.5 PostgreSQL 1.2 GitLab Installation 1.2.1 Clone the Source 1.2.2 Configuration 1.2.3 Configure GitLab DB settings 1.2.4 Install Gems 1.2.5 Initialize Database and Activate Advanced Features 1.2.6 Install Init Script 1.2.7 Check Application Status 1.2.8 Start GitLab Instance 1.2.9 Double-check Application Status 1.3 Nginx 1.3.1 Installation 1.3.2 Site Configuration

Installation

Prerequisite

$sudo apt-get install build-essential zlib1g-dev libyaml-dev libssl-dev libgdbm-dev libreadline-dev libncurses5-dev libffi-dev curl git-core openssh-server redis-server checkinstall libxml2-dev libxslt-dev libcurl4-openssl-dev libicu-dev 

Install Postfix

Check out the Postfix page

• If the following warning occurs when sending an email,

postdrop: warning: unable to look up public/pickup: No such file or directory

it's probably because sendmail was installed before and caused it.

• Stop sendmail and restart postfix.

$ /etc/init.d/sendmail stop 
$ /etc/init.d/postfix restart 

Ruby

Ruby

Add Git User

$ sudo adduser --disabled-login --gecos 'git version control' git 

Install Gitlab-Shell

# Go to home directory
$ cd /home/git 

# Clone gitlab shell
$ sudo -u git -H git clone https://github.com/gitlabhq/gitlab-shell.git 

$ cd gitlab-shell 

# switch to right version
$ sudo -u git -H git checkout v1.7.0 

$ sudo -u git -H cp config.yml.example config.yml 

# Edit config and replace gitlab_url
# with something like 'http://domain.com/'
$ sudo -u git -H editor config.yml 

# Do setup
$ sudo -u git -H ./bin/install 

PostgreSQL

# Install the database packages
$ sudo apt-get install postgresql-9.1 libpq-dev 

# Login to PostgreSQL
$ sudo -u postgres psql -d template1 

# Create a user for GitLab. (change $password to a real password)
template1=# CREATE USER git WITH PASSWORD '$password'; 

# Create the GitLab production database & grant all privileges on database
template1=# CREATE DATABASE gitlabhq_production OWNER git; 

# Quit the database session
template1=# \q 

# Try connecting to the new database with the new user
$ sudo -u git -H psql -d gitlabhq_production 

GitLab Installation

# install GitLab into home directory of the user "git"
$ cd /home/git 

Clone the Source

# Clone GitLab repository
sudo -u git -H git clone https://github.com/gitlabhq/gitlabhq.git gitlab

# Go to gitlab dir
cd /home/git/gitlab

# Checkout to stable release
sudo -u git -H git checkout 6-0-stable

Configuration

cd /home/git/gitlab

# Copy the example GitLab config
sudo -u git -H cp config/gitlab.yml.example config/gitlab.yml

# Make sure to change "localhost" to the fully-qualified domain name of your
# host serving GitLab where necessary
sudo -u git -H editor config/gitlab.yml

# Make sure GitLab can write to the log/ and tmp/ directories
sudo chown -R git log/
sudo chown -R git tmp/
sudo chmod -R u+rwX  log/
sudo chmod -R u+rwX  tmp/

# Create directory for satellites
sudo -u git -H mkdir /home/git/gitlab-satellites

# Create directories for sockets/pids and make sure GitLab can write to them
sudo -u git -H mkdir tmp/pids/
sudo -u git -H mkdir tmp/sockets/
sudo chmod -R u+rwX  tmp/pids/
sudo chmod -R u+rwX  tmp/sockets/

# Create public/uploads directory otherwise backup will fail
sudo -u git -H mkdir public/uploads
sudo chmod -R u+rwX  public/uploads

# Copy the example Unicorn config
sudo -u git -H cp config/unicorn.rb.example config/unicorn.rb

# Enable cluster mode if you expect to have a high load instance
# Ex. change amount of workers to 3 for 2GB RAM server
sudo -u git -H editor config/unicorn.rb

# Configure Git global settings for git user, useful when editing via web
# Edit user.email according to what is set in gitlab.yml
sudo -u git -H git config --global user.name "GitLab"
sudo -u git -H git config --global user.email "gitlab@localhost"
sudo -u git -H git config --global core.autocrlf input

Important!!!!!: Make sure to edit both gitlab.yml and unicorn.rb to match the actual setup.

Configure GitLab DB settings

• PostgreSQL

sudo -u git cp config/database.yml.postgresql config/database.yml 

# Make sure to update username/password in config/database.yml.
# You only need to adapt the production settings (first part).
# If you followed the database guide then please do as follows:
# Change 'root' to 'gitlab'
# Change 'secure password' with the value you have given to $password
# You can keep the double quotes around the password
sudo -u git -H editor config/database.yml 

# Make config/database.yml readable to git only
sudo -u git -H chmod o-rwx config/database.yml 

Install Gems

cd /home/git/gitlab 

sudo gem install charlock_holmes --version '0.6.9.4' 

# for PostgreSQL (note, the option says "without ... mysql")
sudo -u git -H bundle install --deployment --without development test mysql aws 

Initialize Database and Activate Advanced Features

sudo -u git -H bundle exec rake gitlab:setup RAILS_ENV=production 

# Type 'yes' to create the database.

# When done you see 'Administrator account created:'

login.........admin@local.host
password......5iveL!fe

Install Init Script

• Download the init script (will be /etc/init.d/gitlab):

sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab 
sudo chmod +x /etc/init.d/gitlab 

• Make GitLab start on boot:

sudo update-rc.d gitlab defaults 21 

Check Application Status

# Check if GitLab and its environment are configured correctly:

sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production 

Start GitLab Instance

sudo service gitlab start 
# or
sudo /etc/init.d/gitlab restart 

Double-check Application Status

# To make sure nothing is missing by running a more thorough check with:

sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
# If all items are green, then congratulations on successfully installing GitLab! However there are still a few steps left.

Nginx

Installation

Nginx

Site Configuration

• Download an example site config:

sudo cp lib/support/nginx/gitlab /etc/nginx/sites-available/gitlab 
sudo ln -s /etc/nginx/sites-available/gitlab /etc/nginx/sites-enabled/gitlab 

Make sure to edit the config file to match the actual setup:

# Change YOUR_SERVER_FQDN to the fully-qualified
# domain name of your host serving GitLab.
sudo editor /etc/nginx/sites-available/gitlab 

• Restart

sudo service nginx restart 

login.........admin@local.host
password......5iveL!fe